L. Laguarda, S. Hickel, F.F.J. Schrijer, B.W. van Oudheusden (2024)
Physics of Fluids 36: 016120. doi: 10.1063/5.0179082
The dynamic coupling between a Mach 2.0 shock-wave/turbulent boundary-layer interaction (STBLI) and a flexible panel is investigated. Wall-resolved large-eddy simulations are performed for a baseline interaction over a flat-rigid wall, a coupled interaction with a flexible panel, and a third interaction over a rigid surface that is shaped according to the mean panel deflection of the coupled case.
Results show that the flexible panel exhibits self-sustained oscillatory behavior over a broad frequency range, confirming the strong and complex fluid–structure interaction (FSI). The first three bending modes of the panel oscillation are found to contribute most to the unsteady panel response, at frequencies in close agreement with natural frequencies of the mean deformed panel rather than those for the unloaded flat panel. This highlights the importance of the mean panel deformation and the corresponding stiffening in the FSI dynamics.
The time-averaged flow shows an enlarged reverse-flow region in the presence of mean surface deformations. The separation-shock unsteadiness is enhanced due to the panel motion, leading to higher wall-pressure fluctuations in the coupled interaction. Spectral analysis of the separation-shock location and bubble-volume signals shows that the STBLI flow strongly couples with the first bending mode of the panel oscillation. This is further confirmed by dynamic mode decomposition of the flow and displacement data, which reveals variations in the reverse-flow region that follow the panel bending motion and appear to drive the separation-shock unsteadiness. Low-frequency modes that are not associated with the fluid–structure coupling, in turn, are qualitatively similar to those obtained for the rigid-wall interactions, indicating that the characteristic low-frequency unsteadiness of STBLI coexists with the dynamics emerging from the fluid–structure coupling. Based on the present results, unsteady FSIs involving STBLIs and flexible panels are likely to accentuate rather than mitigate the undesirable features of STBLIs.